Home HOME Kovove Materialy-Metallic Materials 2017 Metallic Materials Vol. 55 (2017), no. 6, pp.431-440

Journal info

Select Journal







Webshop Cart

Your Cart is currently empty.

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Metallic Materials Vol. 55 (2017), no. 6, pp.431-440

Title: Performance of cryogenically treated Cu and CuCrZr electrodes in an EDM process
Author: A. CETIN, G. CAKIR, K. ASLANTAS, N. UCAK, A. CICEK

Abstract: In this study, the effects of cryogenic treatment (CT) on the performance of CuCrZr alloy and Cu electrodes in electro discharge machining (EDM) of AISI P20 tool steel were investigated experimentally. For this purpose, a group of electrodes were cryogenically treated at –140 °C for 30 min and then tempered at 175 °C for 1 h. The tool performance was evaluated in terms of electrode wear rate (EWR), material removal rate (MRR), and average surface roughness ( Ra) of machined surfaces. The EDM tests were conducted at pulse currents of 4, 8, 12, and 16 A and pulse durations of 25 and 50 μs. Experimental results showed that treated electrodes were less worn than the untreated ones and the Ra values of machined surfaces decreased when cryo-treated electrodes were used. Also, it was observed that pulse current is the most effective parameter in the EDM process.

Keywords: electro discharge machining (EDM), cryogenic treatment, wear rate, copper alloy
Published online: 27-Feb-2018
Year: 2017, Volume: 55, Issue: 6 Page From: 431, Page To: 440
doi:10.4149/km_2017_6_431


download file



© AEPress s.r.o
Copyright notice: For any permission to reproduce, archive or otherwise use the documents in the ELiS, please contact AEP.