Home HOME Kovove Materialy-Metallic Materials 2018 Metallic Materials Vol. 56 (2018), no. 2, pp.121-129

Journal info

Select Journal







Webshop Cart

Your Cart is currently empty.

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Metallic Materials Vol. 56 (2018), no. 2, pp.121-129

Title: Investigation of microstructure and mechanical properties of titanium alloy sheet using low power Nd-YAG laser welding process
Author: U. Kumar, D. K. Gope, R. Kumar, S. Chattopadhyaya, A. K. Das, A. Pramanik, G. Krolczyk

Abstract: In the present investigation, welding of 1 mm thick Ti-6Al-4V sheet has been done by Pulsed Wave (PW) Nd-YAG laser with a variation of laser power from 100 to 400 W and welding speed from 4 to 6 mm s-1. The microstructure and microhardness of the fusion zone indicate that the finely serrated and regular plate-shaped microstructures and the resultant hardness in the welds are the key factors behind the enhanced tensile strength of all joints. The weld bead size increases with decreasing welding speed and vice versa. The hardness increases around the heat affected zone as compared to that of the parent metal, and it is the maximum at the centre of the welded region. In the investigation, the tensile strength of specimen with different process parameters has been found to be approximately equal to the tensile strength of the parent metal. In XRD analysis, the weld zone has been found to consist of 78 % α and 22 % β peaks where two β-titanium peaks (bcc) 100 occur at 39.5110° and 56.9120°.

Keywords: microstructure, microhardness, pulsed wave laser, tensile strength
Published online: 17-May-2018
Year: 2018, Volume: 56, Issue: 2 Page From: 121, Page To: 129
doi:10.4149/km_2018_2_121


download file



© AEPress s.r.o
Copyright notice: For any permission to reproduce, archive or otherwise use the documents in the ELiS, please contact AEP.