Home HOME Kovove Materialy-Metallic Materials 2018 Metallic Materials Vol. 56 (2018), no. 4, pp.213-221

Journal info

Select Journal







Webshop Cart

Your Cart is currently empty.
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Metallic Materials Vol. 56 (2018), no. 4, pp.213-221

Title: The influence of chill thickness and austempering temperature on dry sliding wear behaviour of a Cu-Ni carbidic austempered ductile iron (CADI)
Author: E. Akbarzadeh Chiniforush, S. Yazdani, V. Nad
Abstract: The influence of chill thickness and applied load were studied on wear behaviour of a carbidic austempered ductile iron containing Cu and Ni. Ductile iron with chemical composition Fe-3.6C-2.6Si-0.53Cu-0.51Ni (in wt.%) was cast into standard moulds with copper end chills of different thicknesses. Wear test samples were prepared from the chilled surface of the blocks. Austenitizing heat treatment was carried out at 870ºC followed by austempering at 270, 320, 370 and 410ºC in electrically heated salt bath furnaces for optimum times. A block-on-ring testing machine was used to carry outwear tests in dry sliding condition under applied loads of 100 and 150 N. Scanning electron microscopy was used to examine the worn surface of the samples. The results indicated an improvement in wear resistance of austempered ductile iron by introducing carbides into the matrix compared to that of non-carbidic samples. Best wear performance in carbidic austempered ductile iron was achieved for a matrix containing about 30 vol.% carbides.
Keywords: carbidic austempered ductile iron, sliding wear, chill thickness, block-on-ring
Published online: 08-Oct-2018
Year: 2018, Volume: 56, Issue: 4 Page From: 213, Page To: 221
doi:10.4149/km_2018_4_213


download file


© AEPress s.r.o
Copyright notice: For any permission to reproduce, archive or otherwise use the documents in the ELiS, please contact AEP.