Home CUSTOMERS Kovove Materialy-Metallic Materials 2021 Kovove Materialy-Metallic Materials Vol. 59 (2021), no. 6, pp.391–399

Journal info

Select Journal







Webshop Cart

Your Cart is currently empty.
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Kovove Materialy-Metallic Materials Vol. 59 (2021), no. 6, pp.391–399

Title: The effect of Ni addition on microstructure and mechanical properties of cast A356 alloy modified with Sr
Author: D. Ozyurek, M. Yıldırım, B. Yavuzer, I. Simsek, T. Tuncay
Abstract: In this study, casting A356 alloy was pre-alloyed with Ni, and the modification process with Sr was applied by the casting method. The role of Ni on the microstructural and mechanical properties of the produced A356-Ni alloys was investigated. The produced alloys were naturally aged at room temperature for 24 h and artificially aged at 170 °C for 10 h. Optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffractometer were used in microstructure studies of the A356-Ni alloys. Tensile tests and hardness measurements were carried out to determine mechanical properties. Statistical analysis of Weibull distribution on the tensile test results revealed that the characteristic ultimate tensile strength increased due to increasing the amount of alloying elements, while the characteristic percentage elongation is decreased. This was because Al-Si-Fe intermetallic decomposition and Al-Si-Fe-Ni intermetallics were formed, primarily, 0.5 and 1.0 % Ni addition. It was also determined that the Al-Si-Fe-Ni intermetallics with a morphology non-sharp corners formed more homogeneous in the microstructure. But in the A356 alloys with the addition of 1.5 % Ni, Al-Si-Fe-Ni intermetallics are formed in coarser morphology. In A356 alloys, aluminium dendrites, Al-Si eutectic between dendrites, Mg2Si precipitates are formed in the structure by ageing. Depending on the amount of Ni added to the A356 alloy, the tensile strength of the alloys containing 0.5 and 1.0 % Ni is increased.
Keywords: A356 alloy, nickel, microstructure, T6 heat treatment, mechanical properties
Published online: 30-Nov-2021
Year: 2021, Volume: 59, Issue: 6 Page From: 391, Page To: 399
doi:10.4149/km_2021_6_391
Price: Call for Pricing





© AEPress s.r.o
Copyright notice: For any permission to reproduce, archive or otherwise use the documents in the ELiS, please contact AEP.