Home FOR AUTHORS Kovove Materialy-Metallic Materials 2019 Kovove Materialy-Metallic Materials Vol. 57 (2019), no. 5, pp.317–327

Journal info

Select Journal







Webshop Cart

Your Cart is currently empty.

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Kovove Materialy-Metallic Materials Vol. 57 (2019), no. 5, pp.317–327

Title: Evaluation of the microstructure and properties of Cr3C2 powders added to Vanadis 4 alloy steel via vacuum sintering and heat treatments
Author: S. H. Chang, K. Y. Lee, K. T. Huang, T. H. Yang

Abstract: In this research, different ratios (1, 3, and 5 mass%) of chromium carbide (Cr3C2) powders were added to Vanadis 4 alloy steel powders. The various components of the powders underwent vacuum sintering at 1235, 1250, and 1265 °C for 1 h, respectively. The heat treatment process included quenched, sub-zero, and tempering treatment afterward. The results showed that the alloy with the addition of 5 mass% Cr3C obtained the optimal mechanical properties after sintering at the temperature of 1250 °C for 1 h. Meanwhile, the apparent porosity decreased to 0.04 %; the transverse rupture strength (TRS) and hardness reached 1821.2 MPa and 82.4 HRA. However, the hardness declined slightly to 82.3 HRA, but the TRS substantially increased to 2085.0 MPa. The decrease in hardness could be ascribed to the release of internal stress after the tempering process. Significantly, the alloy with a series of heat treatment processes was effective in enhancing strengthening TRS of the Vanadis 4 composites.

Keywords: chromium carbide, Vanadis 4 alloy steel, vacuum sintering, porosity, transverse rupture strength, sub-zero treatment
Published online: 09-Sep-2019
Year: 2019, Volume: 57, Issue: 5 Page From: 317, Page To: 327
doi:10.4149/km_2019_5_317


download file



© AEPress s.r.o
Copyright notice: For any permission to reproduce, archive or otherwise use the documents in the ELiS, please contact AEP.